Location:
Other series >
Indoor circulating air disinfection and purification machine (medical grade)

Indoor circulating air disinfection and purification machine (medical grade)


Working Principle

This unit adopts an indoor air recirculation mode. Air enters the equipment through the lower return air inlet and passes sequentially through:

1. Three‑Stage High‑Efficiency Filter Cassette (HEPA filter + chemical activated carbon combination)

Captures more than 99% of airborne dust, droplets, and aerosol particles

Simultaneously adsorbs and removes smoke odor and volatile organic compound (VOC) gases


2. High‑Efficiency UV‑C Lamps

Rapidly inactivates viruses and bacteria

Thoroughly kills bacteria and viruses trapped and colonized inside the equipment and on the surface of the high‑efficiency filter, eliminating contamination sources


3. Purified air is returned to the room through the top air outlet

Through short‑time multiple recirculation cycles, the concentration of viruses and bacteria in an enclosed environment is significantly reduced.

Core Technology

Main Model: Mobile (FXA‑100)

 Technical Parameter Value
 Maximum Airflow 600 m³/h
 Rated Power ≤150 W (including UV lamps)
 Recommended Volume Medical premises: ≤120 m³/unit; Civil premises: ≤240 m³/unit
 Noise ≤60 dB (at maximum airflow)
 Dimensions 1100(H) × 400(W) × 400(L) mm

Other Airflow Series

 Series Airflow Capacity
 Small 600 m³/h
 Medium 1,000 m³/h
 Large 10,000 m³/h


Core Component Technical Performance

Three‑Stage High‑Efficiency Filter Cassette

Composition: Various HEPA filters + chemical activated carbon combination

Function: Rapidly filters airborne dust, droplets, and aerosol particles (capture rate >99%); effectively adsorbs and removes various smoke odors and VOC gases

Maintenance: Easy to disassemble and maintain


High‑Efficiency UV‑C Lamps

Technology: Modern UV‑C disinfection technology

Germicidal power: 3–4 times higher than traditional UV lamps at the same power

Germicidal efficiency: Up to >99.9%

Lamp life: ≥8,000 hours (stable performance)

Comparison: Fuxia UV lamp life can reach over 9,000 hours, with some up to 15,000 hours – 3 to 5 times longer than domestic UV lamps (approx. 3,000 hours)

Electronic Monitoring System

Standard features: Fault alarm system, automatic audible and visual alarm system

Optional add‑ons: UV intensity monitoring system, temperature monitoring system, disinfection time accumulation system, UV monitoring system

Comparison of similar products

 Item Fusshia Technology Product General Product (Domestic)
 Treatment circulation flow rate 600 / 1,000 / 10,000 m³/h (three options) Generally smaller
 Filtration system Three‑stage high‑efficiency filter cassette (includes chemical activated carbon) Some lack activated carbon or have insufficient stages
 UV germicidal efficiency Up to >99.9% Generally lower
 UV lamp service life ≥9,000 hours (some up to 15,000 hours) Approximately 3,000 hours
 Power consumption (same airflow) Fewer lamps, lower power consumption More lamps, higher power consumption
 Lamp replacement cost Low (3–5 times longer life) High (frequent replacement)
 Electronic monitoring Fault alarm + audible/visual alarm; optional multiple monitoring systems Basic or none
 Safety during use Can operate continuously in occupied enclosed spaces, no harm to humans Some products are not suitable for occupied environments


Contact Us
Phone 0591-83683783
QQ 1227098480@qq.com
WeChat
Scan to consult